A100钢表面粗糙度与HVOF碳化钨涂层结合强度

采用超音速火焰喷涂方法在AerMet100钢(A100钢)基体上制备了WC10Co4Cr涂层,研究了不同喷砂条件对AerMet100钢表面粗糙度变化及对涂层与基体结合强度的影响.之后将涂层使用化学方法退除,观察涂层制备对AerMet100钢基体表面状态的影响,分析了粗糙度与涂层结合强度之间的关系.结果表明:AerMet100钢基体不同吹砂工艺产生的表面粗糙度 S_a=0.994~4.983 μm时,超音速火焰喷涂WC10Co4Cr涂层的结合强度均不低于72 MPa.喷涂涂层过程对基体表面状态没有较大影响:基体粗糙度 S_a<2 μm时,喷涂后,基体表面的粗糙度略有降低;基体粗糙度 S_a>3 μm时,喷涂后,基体粗糙度略有升高.超音速火焰喷涂的碳化钨钴涂层与AerMet100钢基体的结合同时存在物理与机械力结合,以前者为主要结合力.     

Numerical Study of Parachute-Payload Land Site Distribution with Randomize Wind Gust Model

A parachute-payload model with randomize wind gust is developed to study the landing accuracy of the parachute decelerator system,which can be exactly described by the landing site distribution.The research focuses on the steady descent phase of the parachute descent process,so the parachute and the payload suspension formulation during the phase are mainly discussed.In addition,since the wind effects have a significant impact on the land site distribution of the passive decelerator system and it is difficult to obtain the exact wind profile in practice,major features of parachute-payload system are studied via the randomized wind gust formulation.As the randomized wind gust formulation is adopted,the wind effect can be considered without the exact wind gust profile and the parachute aerodynamic simulation can be fulfilled with uncertainties.Finally,the model is validated and discussed,and the parachute land site distributions with different wind randomize profiles are presented for comparison.The results show that when parachute is less stable,the land site tends to have a larger variance.     

Carrier phase prediction method for GNSS precise positioning in challenging environment

Since the signals of global navigation satellite system (GNSS) are blocked frequently in challenging environments, the discontinuous carrier phases seriously affect the application of GNSS precise positioning. To improve the carrier phase continuity, this paper proposes a carrier phase prediction method based on carrier open-loop tracking. In the open-loop tracking mode, the carrier numerically controlled oscillator (NCO) is controlled by the predicted Doppler, but not by the loop filter output. To improve the phase prediction effective time, accurate receiver clock drift estimation is studied in the prediction method. The phase prediction performance is tested on GNSS software receiver. In the phase prediction effective time tests, open-loop processes were set for the tested channel. The test results show that, when some satellite signals are blocked in 15?s, the probability of carrier phase error less than quarter cycles is more than 94%. In the real time kinematic (RTK) positioning tests, some satellite signals are blocked in 10–15?s repeatedly. The test results show that, the carrier phase continuity is basically not affected by the signal interruption, and the RTK can almost keep continuous centimeter-level positioning accuracy without re-fixing the integer ambiguity.     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

Effects of in-track maneuver on Sun illumination conditions of near-circular low Earth orbits

By developing approximate analytical models considering the J₂ perturbation, the effects of an in-track maneuver on the orbital Sun illumination conditions of near-circular low Earth orbits are analyzed. First, two approximate models for the variations in orbital sunshine angles are developed, one for variations at a given time and the other for variations at a given argument of latitude. Next, two approximate models for variations in orbital arc in Earth shadow are developed, one considers the small eccentricity and the other uses the zero eccentricity. Finally, the developed approximate models are applied to analyzing the Sun illumination conditions of a typical in-track maneuver mission on a near-circular low Earth orbit. From the results obtained, three major conclusions can be drawn. First, the variations in orbital sunshine angles at a given time may reach tens of degrees when the drifting time reaches hundreds of orbital periods, and the approximate model for that situation cannot effectively approach the numerical results. Second, the variations in orbital sunshine angles for any given argument of latitude are only a couple of degrees even when the drifting time reaches 500 orbital periods, and the approximation model developed can effectively approach the numerical results. Third, for variations in orbital arc in Earth shadow, the approximate model considering the small eccentricity has simple expressions and can effectively approach the numerical results; in contrast, the approximate model using the zero eccentricity has relatively worse precision.     

基于集成学习模型的飞行学员认知负荷研究

在飞行过程中,飞行员需要在短时间内接收大量信息,并做出正确的判断与决策,而过高的认知负荷会影响其感知、判断、决策等认知过程,进而影响飞行安全。首先通过飞行模拟实验获取飞行学员在执行不同飞行任务时的生理数据;然后通过时域、频域分析等方法提取呼吸和心电信号的特征,并通过统计学方法筛选出能够反映认知负荷水平的指标;最后结合支持向量机、K 最邻近、人工神经网络等方法建立集成学习模型,对飞行学员的认知负荷进行评估,并与单一算法进行对比。结果表明：本文建立的集成学习模型具有较高的准确率,能够更好地反映飞行学员认知负荷水平。     

高性能螺旋桨优化设计

无人多旋翼飞行器使用的桨叶以固定翼螺旋桨为主,但其气动环境与固定翼不尽相同。使用逆向重构技术对原始桨叶进行参数化建模,并基于CFD数值计算技术对参数化基准模型的扭转角分布规律和叶型积叠方式在垂直飞行状态下进行优化设计。结果表明:在功率允许范围内,桨叶在悬停状态下的效率有了较大提升。     

KrF激光照射约束层靶驱动产生高速飞片研究

微小空间碎片的超高速撞击对航天器性能有重要影响。为了研究撞击损伤机制,在"天光一号"装置上开展了Kr F准分子激光照射约束层靶产生高速飞片的实验研究,利用成像速度干涉仪(Imaging-VISAR)对飞片自由面速度进行诊断。采用1.9 J准分子激光将10μm的Al飞片加速至12 km/s,且整个过程为准等熵加载。研究结果表明准等熵加载下激光能量转化为飞片动能的效率(达39.4%)比冲击加载要高得多,飞片速度也高于后者。